Downloads
Three ways to install Firmware v3.0.29 on an ESP32-S3 N8R8 or N16R8. Already have a configured gateway? Follow the update guide.
Choose an installation method
A. Install from browser recommended
Connect the ESP32-S3 by USB and install from this site in desktop Chrome or Edge.
Install FirmwareB. Easy Install — Windows, macOS & Linux
A download with guided scripts for every desktop system.
Download Easy InstallC. Advanced downloads
Factory and update images, boot loader and partition table, checksums and manifest.
Advanced downloadsC. Advanced downloads
| File | Use |
|---|---|
RecoveryGateway-v3.0.29-factory.bin | New device: esptool at 0x0. Erases all settings. |
firmware.bin | Application image with every Web UI language (English, Italiano, Español, 简体中文, Français, Deutsch) and the W5500 driver: Web UI upload and GitHub updater on the current flash layout. |
bootloader.bin, partitions.bin | Bootloader and partition-table components. Use the complete browser/Easy Install procedure for a layout migration: it also initializes OTA selection. These files alone are not a complete update procedure. |
SHA256SUMS.txt, release-manifest.json | Original image/archive checksums and build metadata. For the current Easy Install ZIP, use the ZIP and source checksums. |
| FIRMWARE-LICENSES.txt | Firmware and bundled dependency copyright and license notices. |
| Source code and release notes | Exact sources of this release. |
Advanced flashing (new device): esptool --chip esp32s3 write-flash 0x0 RecoveryGateway-v3.0.29-factory.bin.
Verify a download
sha256sum -c SHA256SUMS.txt # Linux
shasum -a 256 -c SHA256SUMS.txt # macOS
Get-FileHash firmware.bin -Algorithm SHA256 # Windows PowerShell
All releases and their original installation assets are available on GitHub.
One image
The current firmware ships a single image for N8R8 and N16R8 boards with every language and the W5500 Ethernet driver (experimental, off until configured). There are no separate language or Ethernet downloads.
Updating an existing device
Back up under System → Backup, then use System → Firmware for a Web UI upload or the opt-in GitHub updater. If your device uses an earlier partition layout, use the migration guides before uploading the current image.